![background image](http://html.mh-extra.com/html/ryobi/ra-acddu1840/ra-acddu1840_operators-manual_1503672013.webp)
9
PrOBLem
cAUse
POssiBLe sOLUtiON
Compressor runs continuously
Defective pressure switch
Take compressor to service centre
Excessive air usage
Take compressor to service centre
Decrease air usage; compressor not large
enough for tool’s requirement
Piston rings are worn
Replace piston rings; air inlet filter
is blocked, call customer service for
assistance
Air output lower than normal
Broken inlet valves
Take compressor to service centre
Connections leaking
Tighten connections
201501
13v1