Ryobi P796, Operator'S Manual

Page: 4 / 16

4 – English
OPERATION
FEATURES
WARNING:
Do not direct the light beam at persons or animals and
do not stare into the light beam yourself (not even from a
distance). Staring into the light beam may result in serious
injury or vision loss.
WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS
You may use this tool for the purpose listed below:
 General illumination of most work area spaces
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 6.
 Insert the battery pack into the product as shown.

Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured before
beginning operation.
 Depress the latches to remove the battery pack.
For complete charging instructions, refer to the Operator’s
Manuals for your battery pack and charger models.
POWER BUTTON (HIGH/MEDIUM/LOW/OFF)
See Figure 2, page 6.
 Connect the product to the battery pack.

Press and release the power button to cycle between
HIGH, MEDIUM, LOW, and OFF.
 Press and hold the button for two seconds while ON (in
any mode) and the light will shut off.

Press and hold the button for two seconds while OFF
allows the light to go into LOW mode.
HANGING THE LED AREA LIGHT
See Figure 3, page 6.
WARNING:
Only hang or mount LED area light in an area where no
electrical wires, utility cables, pipes, or other obstructions
are located. Contact your local utility company or a
qualified electrician if you are unsure. Do not hang area
light from any electrical power cord. Ensure area light is
securely installed to prevent falling object hazard. Failure
to follow these instructions can result in electrocution,
electrical shock, or other serious personal injury.

Install a clip or a lanyard to one of the light’s brackets
for hanging.
NOTICE:
Do not attach anything other than the battery pack to the
area light when it is hanging.

Be careful not to hang the area light in a position that
prevents normal operation of the light.
PRODUCT SPECIFICATIONS
Input ........................................................................18V DC
Maximum Light Output .............400 Lumens in High mode