background image

OPERATOR’S MANUAL

MANUEL D’UTILISATION
MANUAL DEL OPERADOR

18 VOLT BATTERY CHARGER

CHARGEUR DE PILES DE 18 V
CARGADOR DE BATERÍA DE 18 V

P118B

 Safety Rules for Charger ....................2

 

Symbols ..............................................3



 Assembly ............................................3

 Operation .........................................4-5

 Maintenance .......................................5

 Illustrations .........................................6

 Parts Ordering/Service ........Back page

 Règles de sécurité pour le chargeur ..2

 

Symboles ............................................3



 Assemblage ........................................3

 Utilisation .........................................4-5

 Entretien .............................................5

 Illustrations .........................................6

 Commande de pièces  

et réparation ......................Page arrière

WARNING:

 

To reduce the 

risk of injury, the user must read and 

understand the operator’s manual 

before using this product.

  Reglas de seguridad para el  

empleo del cargador .......................... 2



 

Símbolos ............................................ 3



 Armado .............................................. 3

 Funcionamiento ..............................4-5

 Mantenimiento ................................... 5

 Ilustraciones ...................................... 6



  Pedidos de piezas  

y servicio ........................Pág. posterior

ADVERTENCIA:

 

Para reducir 

el riesgo de lesiones, el usuario debe leer 
y comprender el manual del operador 
antes de usar este producto. 

AVERTISSEMENT :

 

Pour 

réduire les risques de blessures, 

l’utilisateur doit lire et veiller à bien 

comprendre le manuel d’utilisation avant 

d’employer ce produit.  

TABLE DES MATIÈRES

ÍNDICE DE CONTENIDO

TABLE OF CONTENTS

****************

****************

****************

SAVE THIS MANUAL FOR 

FUTURE REFERENCE

CONSERVER CE MANUEL 

POUR FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL 

PARA FUTURAS CONSULTAS

Summary of Contents for P118B



















































































Reviews: