17
MAINTENANCE
3-4mm
2
1
8
NOTE:
Hold the tip of the bar up and tighten
the bar bolt securely. The chain tension is
correct when the gap is about 3-4 mm.
NOTE:
If the chain is too tight, it will not rotate.
Loosen the bar bolt slightly and turn chain
tensioning screw 1/4 turn counterclockwise.
Lift the tip of the bar up and retighten bar bolt
8.
Fully tighten the bar bolt and drive case cover.
Bar bolt should have at least 4 turns after finger
tight.
Summary of Contents for OPP1850
