Ryobi ONE+ R18SUP10, Manual

Page: 5 / 20

5
Original Instructions
LED INDICATOR DESCRIPTIONS
LED indicator Red LED Green LED Status
Low battery On -
The battery pack capacity is at
25%. The LED light stays on until
the battery pack is recharged.
Water sensor
- On The product is on.
2 quick flashes - The 15-minute timer is running out.
3 quick flashes - The 10-minute timer is running out.
4 quick flashes - The 5-minute timer is running out.
5 quick flashes
(with buzzing
sound)
-
The water sensor alarm is on. The
product does not detect water. Put
the submersible pump under water.
6 quick flashes -
The low currrent alarm is on. The
motor is idling. Clean the pump
inlet and put the submersible pump
under water.
7 quick flashes -
The over voltage alarm is on.
Replace the battery pack.
8 quick flashes -
The short circuit alarm is on. Turn
off the product and remove the
battery pack. Bring the product to
an authorised service centre.
2 slow flashes -
The under voltage alarm is on. The
battery pack is overdisharging.
Change the battery pack.
3 slow flashes -
The current check circuit fault
alarm is on. The circuit is
damaged. Turn off the product and
remove the battery pack. Bring the
product to an authorised service
centre.