Ryobi ONE+ R18SUP10, Manual

Page: 9 / 20

9
Getting started
1
2
12
Press the on/off button on the control
panel to turn on the product. Press
the on/off button again to turn off the
product.
9
Attach the flexible hose and hose clamp to the discharge elbow. Tighten the hose
clamp to secure the flexible hose.
6
5
Close the battery box.
10
Lay the submersible pump on its side.
4
Install the battery pack. Make sure that
the latches on the battery pack click
into place.
3
Open the battery box.
NOTE: The submersible pump can
only be submerged within the specified
immersion depth. Do not exceed the
maximum immersion depth for the pump.
x1 x2
x3
5min 10min
15min
NOTE: Press the timer button to set a
timer. Each press of the timer button sets
the timer to 5 minutes and the succeeding
press adds another 5 minutes.