background image

3

Original Instructions

 

Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to 

be performed. 

Use of the power tool for operations 

different from those intended could result in a hazardous 

situation.

 

Keep handles and grasping surfaces dry, clean 

and free from oil and grease. 

Slippery handles and 

grasping surfaces do not allow for safe handling and 

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

 

Recharge only with the charger specified by the 

manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

 

Use power tools only with specifically designated 

battery packs. 

Use of any other battery packs may 

create a risk of injury and fire.

 

When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, 

nails, screws or other small metal objects that can 

make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns 

or a fire.

 

Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. 

If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help. Liquid ejected from the 

battery may cause irritation or burns.

 

Do not use a battery pack or tool that is damaged or 

modified. 

Damaged or modified batteries may exhibit 

unpredictable behaviour resulting in fire, explosion or 

risk of injury.

 

Do not expose a battery pack or tool to fire or 

excessive temperature. 

Exposure to fire or temperature 

above 130°C may cause explosion.

 

Follow all charging instructions and do not charge 

the battery pack or tool outside the temperature 

range specified in the instructions. 

Charging 

improperly or at temperatures outside the specified 

range may damage the battery and increase the risk of 

fire.

SERVICE

 

Have your power tool serviced by a qualified repair 

person using only identical replacement parts. 

This 

will ensure that safety of the power tool is maintained.

 

Never service damaged battery packs. 

Service 

of battery packs should only be performed by the 

manufacturer or authorised service providers.

CORDLESS SECATEURS SAFETY WARNINGS

  DANGER!

 Keep hands away from the blade. Contact 

with the blade will result in serious personal injury.

WARNING!

 Do not leave the product unattended before 

the LED and sound indicate that it is off.

 

Save these instructions. Refer to them frequently, and 

use them to instruct others who may use the product. 

If you loan someone the product, loan them these 

instructions also to prevent misuse of the product and 

possible injury.

 

Never allow children, persons with reduced physical, 

sensory, or mental capabilities or lack of experience 

and knowledge, or people who are unfamiliar with these 

instructions to use the product. Local restrictions may 

limit the age of operator.

 

Do not operate the product in poor lighting. Use the 

product only in daylight or good artificial light.

 

To reduce the risk of injury associated with contacting 

moving parts, always turn off the product, remove the 

battery pack, and make sure that all moving parts have 

come to a stop:

 

before clearing a blockage

 

before checking, cleaning, or working on the product

 

before changing accessories 

 

before leaving the product unattended

 

before performing maintenance

 

Keep the product clean of clippings and other materials. 

They may become lodged between the jaw and blade.

 

Keep the area clear of all bystanders, children, and pets 

while operating the product.

 

When cutting a limb under tension, be alert for springback 

so that you will not be struck when the tension in the 

wood fibres is released.

 

Maintain the product with care. Keep the cutting blades 

sharp and clean for best performance and to reduce the 

risk of injury. Follow the instructions for lubricating and 

changing accessories. 

 

Before using the product, check for damaged parts and 

press the trigger to ensure that the cutting blades open 

and close correctly. Before further use of the product, 

any part that is damaged must be carefully checked to 

determine that it will operate properly and perform its 

intended function. Keep hands away from the blade.

 

Keep your body warm in cold weather. When operating 

the product, wear gloves to keep the hands and wrists 

warm. It is reported that cold weather is a major factor 

contributing to Raynaud’s Syndrome.

 

Injuries may be caused, or aggravated, by prolonged 

use of a tool. When using any tool for prolonged periods, 

ensure that you take regular breaks.

 

If the blade is stuck in a branch during operation, do not 

twist the cutting blade. Turn off the product and pull the 

cutting blades straight out slowly from the branch.

 

Cut branches one by one.

 

Never hold the branch you are pruning with your free 

hand. Keep hands and any other part of the body away 

from the cutting area. Never touch the blades to avoid 

injuries.

 

Do not grasp the exposed cutting blades when picking 

up or holding the product. 

 

Do not use the product in rain or snow.

 

Do not use the product to cut wires.

 

Do not cut where there is a risk of hidden wiring.

 

Operate the product only in temperatures between 0°C 

and 40°C.

 

Store the product in a location where the ambient 

temperature is between 0°C and 40°C.

ADDITIONAL BATTERY SAFETY WARNINGS

 

To reduce the risk of fire, personal injury, and product 

damage due to a short circuit, never immerse the tool, 

battery pack, or charger in fluid or allow fluid to flow 

inside them. Corrosive or conductive fluids, such as 

seawater, certain industrial chemicals, and bleach or 

Summary of Contents for ONE+ R18SEC





















Reviews: