Ryobi GD125, Operator'S Manual

Page: 28 / 172

28 - English
Sectional
Door
Sectional
Door
Sectional
Door
Sectional
Door
Fig. 45
Fig. 47
Fig. 48
Fig. 46
CONNECTING DOOR BRACKET TO OUTER
TROLLEY
See Figures 45 - 50.

Locate the following items:
Curved Door Arm
Straight Door Arm
Medium Clevis Pin
Small Clevis Pin
Hitch Pins (2)
Bolts (1/2 in. x 1 in.) [2]
Lock Nuts (1/2 in.) [2]
To connect sectional doors:

Lower the garage door completely.

Pull the emergency release rope down and slide outer
trolley toward the garage door.

Secure straight door arm to the rear of the outer trolley
using medium clevis pin and hitch pin.

Secure curved door arm to the door bracket using small
clevis pin and hitch pin.

Bring the curved and straight arms together. Choose two
sets of aligned holes and install bolts and nuts. Tighten
bolts and nuts with a 1/2 in. socket.
NOTE: For better rigidity, install fasteners in holes that
are as far apart as possible.
NOTE: If the holes in the arm do not align, remove the
straight door arm and reattach it in the reverse position.

If the straight door arm hangs too low after assembly,
you can shorten the length of the arm by cutting off up
to 6 inches.
Curved
Door Arm
Hitch Pin
Hitch Pin
Clevis Pin
Clevis
Pin
Straight
Door Arm
Bolt
Lock
Nut
Emergency
Release Rope
Outer
Trolley
INSTALLATION