2
English
e.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use.
Many accidents
are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed.
Use
of the power tool for operations different from
intended could result in a hazardous situation.
5. SERVICE
a.
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
Always wear safety goggles and a dust mask
when
sanding, especially sanding over-head.
The product is not suitable for wet sanding.
Do not use sanding paper larger than needed.
Extra paper extending beyond the sanding pad can
also cause serious lacerations.
The dust bag shall be equipped with the product.
It
should be emptied frequently. To connect a dust bag,
insert the adaptor of dust bag to the dust-collection
opening on the rear end of the sander.
WARNING
Do not throw sanding dust on an open fi re because
materials in fi ne particle form may be explosive.
WARNING
A suitable breathing respirator must be worn while
sanding lead paint, some wood and metal to avoid
breathing the harmful/toxic dust or air.
Additional safety instructions
WARNING
The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
product by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the product.
Keep children and visitors away.
Visitors should
wear safety glasses and be kept a safe distance from
work area. Do not let visitors contact tool or extension
cord.
It is recommended that this tool always be supplied via
a residual current device with a rated residual current
of 30mA or less.
WARNING
Do not throw sanding dust on an open fi re because
materials in fi ne particle form may be explosive.
WARNING
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.
SPECIFICATIONS
Model
ESS200RG
ESS280RG
Power
200 W
280 W
Voltage
240 V 50 Hz
240 V 50 Hz
No load speed
12000 min
-1
7000-12000 min
-1
Orbital diameter
2.0 mm
2.0 mm
Weight
1.5 kg
1.7 kg
FEATURES
See Figure 1.
Your sander is suitable for sanding with coarse, medium
and fi ne grit sandpaper. It will produce a fi ne scratch
free fi nish when used to sand with the grain on wood
surfaces.
