![background image](http://html1.mh-extra.com/html/ryobi/ess-3215v/ess-3215v_user-manual_1506231014.webp)
W...............................................................................Watts
SYMBOL
n
o
................................................................No load
Speed
min
-1
.....................Revolutions or reciprocation per
minute
..................................................................Pad
Size
.....................................................Double Insulation
.......................................Read instruction manual
.......................Wear Personal protective
equipment
.................................Recycle raw materials instead of
disposing as waste. The machine,
accessories and packaging should be sorted for
environmental-friendly recycling.
SPECIFICATION
ESS-3215V
Input
230 V ~ 50 Hz
Wattage
320 W
No load speed
6000-12000 min
-1
Orbital diameter
2.2 mm
Weight
2.2 kg
APPLICATIONS
Use only for the purposes listed below:
■
Sanding on wood surfaces.
■
Removing rust from and sanding steel surfaces.
■
Sanding plastics.
DESCRIPTION
1.
Variation Speed Control
2.
“ON / OFF” Switch Trigger
3.
Power Supplier Cord
4.
Dust Exhaust
5.
Sanding Pad Assembly
6.
Platen
7.
Live Indicator
8.
Sandpaper Puncher
9.
Non-Adhesive Sandpaper
10. Dust Bag Assembly
11. Handle of Clamp
12. Clamp
13. Adhesive Sandpaper
FEATURES
Your sander is suitable for sanding with coarse, medium,
and fine grit sandpaper. It will produce a fine scratch free
finish when used to sand with the grain on wood surfaces.
It has been designed so that flush corner sanding on
three sides of the sander is possible.
Your sander has a comfortable palm grip handle that
provides maximum one-hand comfort, and reduces
operator fatigue during continuous sanding operations.
Your sander also has a built in dust collection that
collects dust through punched holes in the sandpaper
and cushion (Fig. 5).
Before attempting to use your sander, familiarize
yourself with all operating features and safety
requirements.
SWITCH (2)
This tool is equipped with a simple switch control. To turn
the sander "ON", slide the switch to the left.
Slide the switch to the right to turn the sander "OFF".
ELECTRONIC SPEED CONTROL(1)
The electronic speed control allows the operator to adjust
speed to meet varity sanding material from tough heavy
grained timber to delicate veneer.
WARNING
Do not allow familiarity with your sander to make
you careless. Remember, a careless fraction of a
second is sufficient to inflict severe injury.
OPERATION
WARNING
Your sander should never be connected to power
supply when you are assembling parts, making
adjustments, assembling or replacing sandpaper,
cleaning, or when not in use. Disconnecting
sander will prevent accidental starting that could
cause serious personal injury.
INSTALLING SANDPAPER (Fig. 5)
10
GB
English
F
D
E
I
P
NL
S
DK
N
FIN
GR
H
CZ
RUS
PL
RO
SLO
TR
HR
ESS-3215V(EU)-1.qxd 12/7/03 8:49 AM Page 10