2
g.
Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed.
Use
of the power tool for operations different from
intended could result in a hazardous situation.
5. SERVICE
a.
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
SPECIAL SAFETY RULES
Wait for the cutter to stop before setting the tool
down.
An exposed cutter may engage the surface
leading to possible loss of control and serious injury.
This product is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the product by a person responsible for their
safety. Children should be supervised to ensure
that they do not play with the product.
Keep children and visitors away.
Visitors should
wear safety glasses and be kept as a safe distance
from work area. Do not let visitors come in contact with
the tool or the extension cord.
Complies with AS/NZS 60745.
It is recommended that this tool always be supplied via
a residual current device with a rated residual current
of 30mA or less.
SYMBOL
Safety Alert
V
Volts
Hz
Hertz
Alternating Current
W
Watts
n
o
No-load speed
min-
1
Revolutions or reciprocations per minute
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
Double insulation
Wear ear protection
Wear eye protection
Please read the instructions carefully before
starting the product.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
SPECIFICATIONS
Model
ERP6582RG /
ERP6582
ERP7582RG /
ERP7582K
Input
240 V 50 Hz
240 V 50 Hz
Wattage
650 W
750 W
No-load speed
16000 min
-1
16000 min
-1
Max. planing depth
1.5 mm
2.0 mm
Max. planing width
82 mm
82 mm
Max. rebate depth
8 mm
12 mm
Weight
3.1 kg
3.2 kg
FEATURES
WARNING
If any parts are missing, do not operate your tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
KNOW YOUR PLANER
Before attempting to operate your tool, familiarise yourself
with all operating features and safety requirements.
However, do not let familiarity with the tool make you
careless.
Your tool is compact and lightweight. It is equipped with
the following features:
SWITCH
The tool has a conveniently located trigger switch.
LOCK-OFF
The lock-off button locks the trigger switch in the OFF
position when the trigger switch is released.
WARNING
Do not allow familiarity with your tool to make you
careless. Remember that a careless fraction of a
second is suffi cient to infl ict severe injury.
