Ryobi EHT150RG, Owner'S Operating Manual

Page: 14 / 16

9
SPEED DIAL SETTINGS
Type of
accessory
Soft wood
Hard
wood
Laminates,
plastics
Steel
Aluminum,
brass, etc.
Shell/
stone
Ceramic Glass
Cut-off discs — — — 1-3 — — — —
Fiberglass cut-
off wheel
— — 1-3 — 1-5 — — —
Sanding
drums
3-MAX 3-MAX 1-3 4-MAX 4-MAX — — —
Felt polishing
wheels
— — — 3-5 3-5 3-5 3-5 3-5
Aluminum
oxide grinding
stones
— — — 3-5 — — — —
Silicon carbide
grinding stone
— — — — 1-2 1-2 4-MAX 4-MAX
Drill bit 4-MAX 4-MAX 1-3 4-MAX 4-MAX — — —
Drywall cutting
bit
4-MAX (Drywall only)
ACCESSORY TABLE
Figure Qty Accessory Application
1 Collet (Ø 3.2 mm)
Attaching bits
1 Collet (Ø 1.6 mm)
3
Orange 120-grit aluminum oxide grinding
wheel bits Ferrous materials: casting, welds, rivets,
rust
1
Green 120-grit silicon carbide grinding
wheel bit Non-ferrous materials: stone, ceramics,
porcelain, glass
1 Drum sander mandrel (Ø 6.4 mm)
Attaching sanding drums
1 Drum sander mandrel (Ø 12.7 mm)
1 Polishing compound vial
Polishing and brightening metals and
plastics
72 Cut-off discs (Ø 23.8 mm x Ø 0.8 mm) Cutting ferrous materials
1
Pink 220-grit aluminum oxide grinding
wheel (Ø 19 mm) Ferrous materials: casting, welds, rivets,
rust
8
Sanding drums (60-grit and 120-grit)
(Ø 6.4 mm x Ø 12.7 mm)
Sanding wood, metals and plastics
8
Sanding drums (60-grit and 120-grit)
(Ø 12.7 mm x Ø 12.7 mm)