USE OUTDOOR EXTENSION CORDS.
Use
only extension cords with approved ground
connection that are intended for use outdoors
and so marked.
Do not operate the bench drill until it is completely
assembled and installed according to the
instructions.
Before turning on, ensure belt guard is down and
the chuck is installed correctly.
Remove adjusting keys and wrenches before
turning on power
Ensure the chuck key is removed from the chuck
before turning on the power.
Ensure the drill bit is securely locked in the chuck
using the key supplied.
Use recommended speed for drill bit size and
workpiece material.
Keep belt guard in place while machine is in operation.
Use only recommended accessories.
Disconnect tool before changing drill bit and ensure
switch is in the off position before plugging in.
Do not use bench drill in damp or wet conditions.
Do not overload tool.
Keep tool well maintained.
Never leave tool running unattended.
Adjust the table or depth stop to avoid drilling into
the table.
RISK OF INJURY DUE TO ACCIDENTAL STARTING.
Do not use in an area where children may be present.
DO NOT OPERATE THIS TOOL WHILE UNDER
THE INFLUENCE OF DRUGS, ALCOHOL, OR
ANY MEDICATION.
ALWAYS STAY ALERT .
Do not allow familiarity
(gained from frequent use of your tool) to cause
a mistake.
ALWAYS REMEMBER
that a careless
fraction of a second is sufficient to inflict severe
injury.
STAY ALERT AND EXERCISE CONTROL.
Watch
what you are doing and use common sense. Do
not operate tool when you are tired. Do not rush.
SAVE THESE INSTRUCTIONS.
Refer to them
frequently and use them to instruct other users.
If you loan someone this tool, loan them these
instructions also.
Page 3
RULES FOR SAFE OPERATION
WARNING:
When servicing use only identical Ryobi replacement
parts. Use of any other parts may create a hazard
or cause product damage.
WARNING:
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals know to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:
. lead from lead-based paints.
. crystalline silica from bricks and cement and other
masonry products, and
. arsenic and chromium from chemically-treated
timber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
DOT NOT EXPOSE
TO RAIN OR USE IN
DAMP LOCATIONS
