![background image](http://html1.mh-extra.com/html/ryobi/edp2521l/edp2521l_owners-operation-manual_1505740003.webp)
RULES FOR SAFE OPERATION
Page 2
Safe operation of this power tool requires that you
read and understand this operator’s manual and all
labels affixed to the tool. Safety is a combination
of common sense, staying alert, and knowing how
your drill press works.
READ ALL INSTRUCTIONS
KNOW YOUR POWER TOOL
. Read the operator’s
manual carefully. Learn the applications and
limitations as well as specific potential hazards
related to this tool.
GUARD AGAINST ELECTRICAL SHOCK
by
preventing body contact with grounded surfaces. For
example:pipes, radiators, ranges, refrigerator
enclosures.
KEEP GUARDS IN PLACE
and in working order.
Never operate the tool with any guard or cover
removed. Make sure all guards are operating
properly before each use.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see keys and adjusting
wrenches are removed from tool before turning
it on.
KEEP THE WORK AREA CLEAN.
Cluttered
work areas and work benches invite accidents.
AVOID DANGEROUS ENVIRONMENTS.
Do not
use power tools near gasoline or other
flammable liquids, in damp or wet locations
or expose them to rain. Keep work area well lighted.
KEEP CHILDREN AND VISITORS AWAY.
All
visitors should wear safety glasses and be kept a
safe distance from work area.
MAKE WORKSHOP CHILD PROOF
with padlocks,
master switches, or by removing starter keys.
DONʼT FORCE THE TOOL.
It will do the job
better and safer at the rate for which it was
designed.
USE THE RIGHT TOOL.
Do not force the tool
or attachment to do a job for which it was not
designed.
USE THE PROPER EXTENSION CORD.
Make
sure your extension cord is in good condition.
When using an extension cord, be sure to use
one heavy enough to carry the current your
product will draw. An undersized cord will cause
a drop in line voltage resulting in loss of power
and overheating . A wire gauge size (A.W.G.) of at
least 16 is recommended for an extension cord 8
metres or less in length. If in doubt, use the next
heavier gauge. The smaller the gauge number,
the heavier the cord.
INSPECT EXTENSION CORDS PERIODICALLY
and replace if damaged.
WEAR PROPER APPAREL.
Do not wear loose
clothing, neckties, or jewelry that can get caught
in the tool’s moving parts and cause personal
injury. Nonslip footwear is recommended when
working outdoors. Wear protective hair covering
to contain long hair.
ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS.
Everyday eyeglasses have only impact-
resistant lenses; they are NOT safety glasses.
PROTECT YOUR LUNGS.
Wear a face or dust
mask if the cutting operation is dusty.
PROTECT YOUR HEARING.
Wear hearing protection
during extended periods of operation.
DONʼT ABUSE CORD.
Never carry tool by the cord
or yank it to disconnect from receptacle. Keep cord
away from heat, oil, and sharp edges.
DO NOT OVERREACH.
Keep proper footing and
balance at all times.
MAINTAIN TOOLS WITH CARE.
Keep tools sharp and
clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
NEVER LEAVE TOOL RUNNING UNATTENDED.TURN
POWER OFF.
Disconnect all tools when not in use,
before servicing, or when changing attachments
etc.
AVOID ACCIDENTAL STARTING.
Be sure switch
is off when plugging in.
USE RECOMMENDED ACCESSORIES.
The use
of improper accessories may cause risk of injury.
USE ONLY DRILL BITS
that comply with SAA and
rated greater than 2500 RPM.
CHECK DAMAGED PARTS.
Before further use of
the tool, a guard or other part that is damaged
should be carefully checked to determine that
it will operate properly and perform its intended
function. Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting and any other conditions that may
affect its operation. A guard or other part that is
damaged must be properly repaired or replaced
by an authorised service centre to avoid risk of
personal injury.
KEEP TOOL DRY, CLEAN, AND FREE FROM
OIL AND GREASE.
Always use a clean cloth
when cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any solvents to
clean tool.
INSPECT TOOL CORDS AND EXTENSION
CORDS PERIODICALLY
and, if damaged, have
repaired by a qualified service technician. Stay
constantly aware of cord location and keep it well
away from the rotating wheel.
NEVER USE IN AN EXPLOSIVE ATMOSPHERE.
Normal sparking of the motor could ignite fumes.