5
WARNING
Check carefully whether or not there are cracks in the
wheel. Replace a cracked wheel immediately.
TOOL-LESS WHEEL GUARD
See Figure 6 - 7.
Release the wheel guard lock lever then turning the tool-
less wheel guard to the desired position. The max. turning
axie is 90° on either side; otherwise the guard can't be
locked.
LIVE TOOL INDICATOR
This tool features a live tool indicator which illuminates as
soon as the tool is connected to the supply. This warns the
user that the tool is connected and will operate when the
switch is pressed.
MAINTENANCE
WARNING
Do not make any adjustments while the motor is in
motion.
Always disconnect the power cord from the socket
before changing removable or expendable parts,
before lubricating or working on the unit.
After use, check the tool to make sure that it is in good
condition.
It is recommended that you take this tool to a Ryobi
authorised service center for thorough cleaning and
lubrication at least once a year.
If the power supply cord is damaged, it must be replaced
only by the manufacturer or by an authorized service
center to avoid risk. Contact authorized service center.
WARNING
To ensure safety and reliability, all repairs should be
performed by an authorised service center or other
quali
fi
ed service organisation.
SYMBOLS
Safety Alert
Class II, double insulated
Please read the instructions carefully before
starting the product.
Wear ear protection
Wear eye protection
Wear dust mask.
Do not use chipped, cracked or defective
grinding wheel
Not for wet grinding. Using water or other liquid
coolants may result in electrocution or shock.
Wear safety hand gloves
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
CE Conformity
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice.
