Ryobi DOG HOUSE BRONZE LEVEL, Instructions

Page: 2 / 5

BRONZE LEVEL
PROjEct cENtRE
Dog House
cUttiNG LiSt
MAtERiAL LiSt AND cOStiNG
tOOL LiSt
iNtRODUctiON
Unfortunately for staffies Zoe and Brim, their lease on the laundry of the family home had run out and was
time to move into a new residence! After a short family meeting it was agreed that they both would be happy
to share the same house, but insisted they have their own entry door!
•
PPE (Personal Protective Equipment)
•
Drill
•
5mm drill bit
•
Circular saw
•
Combination square
•
2 clamps
•
Router
•
Jigsaw
•
Reciprocating saw
•
Planer
•
Tape measure
Material Size (mm) No. Unit cost total cost
CD plywood 2400 x 1200 x 12 3 $46.00 $138.00
DAR pine 3000 x 42 x 19 4 $3.42 $13.68
Dowel 1800 x 12.5 1 $4.75 $4.75
Galvanised vents 230 x 150 2 $4.10 $8.20
Galvanised wood
screws
28 x 8g
40 x 8g
12 x 6g
100
100
100
$6.20
$6.90
$4.60
$6.20
$6.90
$4.60
item Material Size L x W x t No.
Base 12mm CD plywood 1200 x 875 1
Sides 12mm CD plywood 715 x 850 2
Gable ends 12mm CD plywood 1000 x 1200 2
Roof panels 12mm CD plywood 1100 x 260 6
Awning 12mm CD plywood 620 x 150 (80) 2
Ridge Pine DAR 810 x 42 x 19 1
Internal cleats Pine DAR 850 x 42 x 19 2
Pine DAR 1135 x 42 x 19 1
Pine DAR 650 x 42 x 19 4
Roof cleats Pine DAR 630 x 42 x 19 4
Awning cleats Pine DAR 630 x 42 x 19 2