2
English
GB
FR
DE
ES
IT
NL
PT
DK
SE
FI
NO
RU
PL
CZ
HU
RO
LV
LT
EE
HR
SI
SK
GR
TR
OPERATION
WARNING
Always w ear safety goggles or saf
e
ty glasses
with side shields when oper
a
ting products .
Failure to do so could result in objects being
thrown into y
o
ur e
y
es, resulting in possib
l
e
serious injury.
WARNING
Do not use an
y
attachments or accessor
i
es not
recommended by the manufacturer of this product.
The use of attachments or accessor
i
es not
recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
■
Driving screws with screwdriver bits
■
Light-duty drilling
TO CHARGE (Fig. 2)
When charging the scre
w
driver, a red charge light will
illuminate on the handle of the scre
w
driver. This red charge
light will go off when the screwdriver is fully charged.
■
Insert c
h
arger plug into i
n
put jack making sure it is
properly connect
e
d.
■
Charger can be used with nor
m
al household v
o
ltage
of 230 V, 50Hz, AC only.
■
Connect charger to power supply.
■
After normal usage, a minimum of
10-12
hours charging
time is required to fully recharge the screwdriver.
■
Do not place charger in an area of e
x
treme heat or
cold. It will work best at normal room temperature.
■
Remove the product from the charger once it is fully
charged and ready for use.
WARNING
Battery products are always in operating condition.
Therefore, the s
w
itch should alw
a
ys be loc
k
ed
when not in use or carrying at your side.
ADJUSTABLE TORQUE CLUTCH
This scre
w
driver is equipped with an adjustab
l
e torque
clutch for dr iving different ty
p
es of scre
w
s into diff
e
rent
ma
t
e
r
ials. The proper
setting depe
n
ds on the
t
ype of
mater
i
al and the size of screw you are using.
ADJUSTING TORQUE (Fig. 3)
There are tw
e
lve torque indicator settings located on the
front of the screwdriver.
■
Rotate adjustment r
i
ng to desired setting, aligning
num
b
er on adjustment ring with arrow on housing.
1 - 2 For driving small screws
3 - 4 For driving screws into soft material
5 - 7 For driving screws into soft and hard
mate
ri
als
8 - 9 For driving screws into hard wood
10 - 11 For driving large screws
For full power applications
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK) (Fig. 4)
The direction of bit rotation is
r
eversible and is controlled
by a selector located abo
v
e the s
w
itch tr igger. With
the scre
w
driver held in nor
m
al oper
a
ting position,
the direction of rotation selector should be positioned
to the left of the s
w
itch tr
i
gger f or f orward motion.
The direction is reversed when the selector is to the r
i
ght
of the switch trigger.
Setting the switch trigger in the OFF (center lock) position
helps reduce the possibility of accidental star
t
ing when
not in use.
To stop the scre
w
driver, release the s
w
itch tr igger and
allow the collet to come to a complete stop.
OPERATION
QUICK CHANGE CHUCK (Fig. 5)
A quic k change chuc
k
mounted on the scre
w
driver is
easy for inser
t
ing or remo
vi
ng the bits
.
To inser t a bit,
insert the bit into collet till loc
k
. To remo
v
e a bit, simply
pull the sleeve of collet forward.
SPINDLE LOCK
The screwdriver spindle is locked when the On/Off switch
is not pressed.
This enables screws to be scre
w
ed in, e
v
en when the
battery is empty.
GRIP ZONE
Soft g
r
ip reduces the danger
o
f slipping and thereb
y
improves the grip on the tool and handing.
At the same time
,
t
he r ubber coating achie
v
es a
vibration-reducing effect.
LED WORKLIGHT (Fig. 6)
The screwdriver has a built-in LED worklight. This feature
is convenient when working in close or tight areas where
additional light is needed. Whenever the switch trigger is
depressed, the LED worklight will illuminate.
NOTE:
During normal operation, if the LED w
o
rklight will
Summary of Contents for CSD41
Page 2: ...6 1 2 4 5 3 ...
Page 3: ...7 9 6 11 10 12 13 14 16 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 8 2 15 ...
Page 88: ...961067085 07 ...