![background image](http://html1.mh-extra.com/html/ryobi/clt1830lbc/clt1830lbc_operators-manual_1506949006.webp)
6
English (Original Instructions)
ATTACHING GRASS DEFLECTOR
See Figure 2-3.
WARNING
The line cut-off blade on the grass deflector is sharp.
Avoid contact with the blade. Failure to avoid contact
can result in serious personal injury.
Remove supplied screws with a Phillips screwdriver
from the trimmer head.
Fit the grass deflector into the slots on trimmer head.
Turn counterclockwise to lock grass deflector into
place.
Line up the screw holes in the grass deflector with the
holes in the trimmer head.
Install supplied screws and tighten by turning
clockwise with a Phillips screwdriver.
OPERATION
WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING
Always wear eye protection with side shields marked to
comply with standards. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING
Never use blades, flailing devices, wire, or rope on this
product. Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
This product will accept Ryobi One+ 18V lithium-ion
battery packs and Ryobi One+ 18V nickel-cadmium
battery packs.
For complete charging instructions, refer to the Operator’s
Manuals for your Ryobi One+ battery pack and charger
models.
NOTE:
To avoid serious personal injury, always remove
the battery pack and keep hands clear of the lock-out
button when carrying or transporting the tool.
DESCRIPTION
Figure 1
1. Switch trigger
2. GripZone™ overmold
3. Lock-out button
4. Adjustable front handle
5. Rotating rear handle
6. Telescoping boom
7. 3-Position pivoting head
8. Edger guide
9. Grass deflector
Figure 2
9. Grass deflector
10. Slide over head and turn counterclockwise
11. Line cut-off blade
Figure 3
12. Screw holes
13. Screws
Figure 4
1. Switch trigger
3. Lock-out button
Figure 5
14. Latches
Figure 6
6. Telescoping boom
15. Locking coupling
Figure 7
16. Knob
Figure 8
17. Pivot button
Figure 11
18. line release button
19. String
Figure 12
8. Edger guide
11. Line cut-off blade
Figure 13
5. Rotating rear handle
15. Locking coupling
Figure 15
21. Spool cover
22. Spool
23. Spool cover lock buttons
24. Slots
25. Eyelet
Figure 16
22. Spool
26. Hole