![background image](http://html1.mh-extra.com/html/ryobi/cid120l/cid120l_operators-manual_1504925006.webp)
6 — English
OPERATION
WARNING:
Do not drive a screw where there is likely to be hidden
wiring behind the surface. Contact with a “live” wire will
make exposed metal parts of the tool “live” and shock
the operator. If you must drive a screw where hidden wire
may be present, always hold tool by insulated gripping
surfaces (handle) when performing the operation to
prevent a shock to the operator.
NOTICE:
The impact driver is not designed to be used as a drill.
DRIVING OR REMOVING SCREWS
See Figures 4 and 5, page 8.
Place the direction of rotation selector in the correct
position for the operation.
Hold the impact driver with one hand.
Place the bit on the screw head and slowly depress the
switch trigger. Start the bit slowly for more control.
As the screw is driven, impacting will begin.
NOTE: Maintenance information begins on page 7 after French
and Spanish language sections. Figures (Illustrations) start on page 8.
This product has a Three-year Limited Warranty.
For Warranty details go to www.ryobitools.com
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may
contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive
harm.
Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your
exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles.
Summary of Contents for CID120L
Page 19: ...NOTES NOTAS...