background image

972000-929
     

OPERATOR'S MANUAL
Compact Finishing Sander
Model CFS1500

Double Insulated

Ryobi Technologies Inc.

1428 Pearman Dairy Road,

Anderson, SC 29625

Post Office Box 1207,

Anderson, SC 29622-1207

Phone 1-800-525-2579

www.ryobitools.com

CFS1500

• SERVICE

Now that you have purchased your tool, should a need ever exist for repair parts or service,
simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all
pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi
Authorized Service Center. You can also check our web site at www.ryobitools.com for a
complete list of Authorized Service Centers.

• MODEL NO. AND SERIAL NO.

The model number and serial number of this tool will be found on a plate attached to the
motor housing.
Please record the serial number in the space provided below.

MODEL NUMBER

SERIAL NUMBER

EXTENSION CORD CAUTION

When using a power tool at a considerable distance from a power
source, be sure to use an extension cord that has the capacity
to handle the current the tool will draw. An undersized cord will
cause a drop in line voltage, resulting in overheating and loss of
power. Use the chart to determine the minimum wire size required
in an extension cord. Only round jacketed cords should be used.

When working with a tool outdoors, use an extension cord that
is designed for outside use. This is indicated by the letters "WA"
on the cord's jacket.

Before using any extension cord, inspect it for loose or exposed
wires and cut or worn insulation.

**Ampere rating

    (on tool data plate)

0-2.0

2.1-3.4

3.5-5.0

5.1-7.0

7.1-12.0 12.1-16.0

Cord Length

Wire Size (A.W.G.)

25'

16

16

16

16

14

14

50'

16

16

16

14

14

12

100'

16

16

14

12

10

CAUTION:

Keep the extension cord clear of the working area. Position the
cord so that it will not get caught on workpiece, tools, or other
obstructions while you are working with a power tool.

**Used on 12 gauge - 20 amp circuit.

Summary of Contents for CFS1500













Reviews: