4
English
SAFETY INSTRUCTIONS
Please read and observe these instructions before using
the device.
Before using the device check that the mains cable
and mains plug are not damaged.
The device must not be damp, neither should it be
used in a damp environment.
Do not use the device if it has suffered any heavy
shock or jolting, or is damaged in any other way.
Due to the heat generated during charging, the battery
charger should not be operated on a combustible
surface/in an inflammable environment.
Do not cover the ventilating slits.
Never disassemble the device yourself.
Pull the plug of the battery charger out of the socket
when it is not in use or when cleaning it.
Only use extension cable that is approved and
technically in perfect condition.
During operation provide sufficient ventilation.
Malfunction during charging can be caused by storing
and operating in places where the temperature
e40°C (+104°F); this should be avoided.
Battery charging in closed cupboards, near heat
sources (radiators, bright sunshine) causes heat to
accumulate and can damage the device.
If the battery is not going to be used for a longer
period, pull the battery off the battery charger and pull
out the mains plug.
Protect battery contact to avoid a short circuit caused
by metallic object that can cause a fire or explosion!
Only charge original recommended batteries.
If the power cord is damaged, it must be replaced
by an Authorised Service Center in order to avoid a
hazard.
WARNING
Do not recharge primary cells (non-rechargeable).
WARNING
Damage to property - Mains voltage must correspond
with the voltage specifications on the device.
OPERATION
WARNING
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes resulting in
possible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
APPLICATIONS
You may use this product for the following purpose:
Charging compatible 14.4V and 18V battery packs.
CAUTION
If at any point during the charging process none of the
LEDs are lit, remove the battery pack from the charger
to avoid damaging the product. Do not insert another
battery. Return the charger and battery to your nearest
service center for service or replacement.
CAUTION
Always place the charger on a rigid surface, not a car
seat, while charging battery pack. Do not place anything
such as a jacket over the charger while it is in use.
CAUTION
Charge in a well ventilated area. Do not block charger
vents. Keep them clear to allow proper ventilation.
BATTERY PROTECTION FEATURES
Ryobi 14.4V and 18V lithium-ion batteries are designed
with features that protect the lithium-ion cells and
maximize battery life.
