background image

7

Carefully read and understand these instructions 

before operating this high pressure washer.
Package Contents

 1. Main unit  

 . Spray handle

 3. Detergent nozzle

 . Spray handle hose (10m)

 . Water supply hose (3m)

 6. Variable nozzle lance

 7. Turbo nozzle lance

 8. Hose joint

 9. Water connector (Main unit attachment) 

 10. Hose clamp

 11. Nozzle cleaning pin

 12. Water suction filter 

 13. Transparent hose

 1. Water suction hose with strainer

Technical data

AJP-1700V

AJP-1700VGQ

Power rating input

1700 W

Pressure

Rated 

  8 MPa

Range

3

8MPa

Allowable pressure 

1 MPa

Flow

Rated

6.0 L / min

Range

3.

6.0L/min

Max. inlet water

 

pressure 

0.6 MPa

Max. temperature: 

40℃

Adding water    

From a faucet       From a faucet /

water buckets

Suction Height

-

1m

Weight  

8.3 Kg

8. kg

Sound pressure level

LpA=77dB(A)

Sound power level

LwA=91dB(A)

Vibration Value

aH=.6m/s

Name of Parts:

 1. Main unit

 . Spray handle

 3. Detergent nozzle

 . Spray handle hose (10m)

 . Water supply hose (3m)

 6. Variable nozzle lance

 7. Turbo nozzle lance

 8. Hose joint

 9. Water connector

 10. Hose clamp

 11. Nozzle cleaning pin

 12. Water suction filter 

 13. Transparent hose

 1. Water suction hose with strainer

 1. Main switch

 16. Pressure adjustment dial

 17. Safety lock button

18. Filter

 19. Valve dial

 0. trigger

Self suction kit

(AJP-1700VGQ)

 1. Filter

 . Filter cap

 3. Rubber washer

 . Strainer

 . Rubber washer

 6. Filter case

7. Power cord

Preparation

Before starting up your machine, we advise you to carefully 

read through this instruction manual. Follow all instructions 

to minimize the risk of injuries when using the machine.

Prior to operation

Before starting up your machine, please check it carefully for 

any defects. If you find any, do not start up your machine and 

contact your distributor.

Especially check:

The insulation of the electric cable should be faultless and 

without any cracks. If the electric cable is damaged, it should 

be replaced by RYOBI authorized distributor.

Mains power supply connection

The following should be observed when connecting the 

machine to the electric installation:

•  Check before operation that the local power supply is the 

same as the specifications on the rating label.

•  This machine is equipped with universal motor with double 

insulation. It is not necessary to have earth connection.  

•  The electric installation shall be made by a certified 

electrician.

•  It is strongly recommended that the power supply to the 

machine should include a residual current device (GFCI).

•  Product protection degree:IPX

General  safety  regulations  and  accident 

prevention

It is essential that you read the safety regulations and 

operating  instructions  in  their  entirety  and  follow  the 

information contained therein in order to eliminate the 

possibility of an accident or potentially dangerous situation 

from occurring while working with the machine.

•  The power plug must be plugged into a properly installed 

socket. The power supply should include a residual 

current device for max. 30 mA.

•  Always check the device, the mains cable and the plug 

before using the machine. Only operate the device when 

it is in good working order and has not been damaged in 

any way. Damaged parts must be immediately replaced 

by a qualified electrician.

•  Always pull the power plug out of the socket outlet before 

doing any work on the machine, before changing the 

nozzle and whenever it is not being used.

• 

Warning!

 Unsuitable extension cable can be dangerous.

•  If an extension cable is used, the plug and socket must be 

of watertight construction. 

•  Only use suitable extension cable when working outdoors. 

Extension cable must have a minimum cross-section of 

1. mm

• 

Warning! 

This device was developed to be used with 

cleaning  agents  supplied  or  recommended  by  the 

manufacturer. The use of any other cleaning agents or 

chemicals can negatively affect the safety of the device.

•  Cable connections should be kept dry and off the ground. 

Always uncoil the extension cable completely to avoid 

heat damage to the cable.

• 

Warning!

 Do not use the device when other persons or 

animals are in the near vicinity unless they are wearing 

appropriate protective clothing.

Summary of Contents for AJP-1700V

















Reviews: