background image

7

UNPACKING

CAUTION.

This packaging contains

sharp objects. Take care when

unpacking. Remove the machine,

together with the accessories supplied, from the

packaging. Check carefully to ensure that the

machine is in good condition and account for all the

accessories listed in this manual. Also make sure

that all the accessories are complete.

If any parts are found to be missing, the machine

and its accessories should be returned together in

their original packaging to the retailer. Do not throw

the packaging away, keep it safe throughout the

guarantee period, then recycle if possible,

otherwise dispose of it by the proper means. Do

not let children play with empty plastic bags due to

the risk of suffocation.

ASSEMBLY

PACKING CONTENTS

• Pressure washer assembly

• Trigger gun, spray lance, adjustable fan nozzle

• High pressure hose

• Quick connector and cleaning needle

• Cable holder and 4 connecting screws

• Handle and 2 connecting screws

• Trigger gun holder

• Operator’s manual.

WARNING.

If any parts are damaged or

missing, do not operate this product until

the parts are replaced. Use of this

product with damaged or missing parts

could result in serious personal injury.

WARNING.

Do not connect to power

supply until assembly is complete.

Failure to comply could result in

accidental starting and possible serious

personal injury.

WARNING.

Do not attempt to modify this

product or create accessories not

recommended for use with this product.

Any such alteration or modification is

misuse and could result in a hazardous

condition leading to possible serious

personal injury.

TOOLS NEEDED

The following tools (not included) are needed for

assembly: Phillips Screwdriver

ATTACHING THE HANDLE

Slide the handle onto the two fasteners located on

top of the pressure washer, Fig.1, and using a

screwdriver fasten in place with the 2 connecting

screws, Fig.2.

ATTACHING THE TRIGGER GUN HOLDER

Simply slide the trigger gun holder onto the

fastener located on the side of the pressure

washer, Fig.3. Ensure the holder is pushed down

completely.

Fig. 1

Fig. 2

Fig. 3

Summary of Contents for AJP-1280

















Reviews: