![background image](http://html1.mh-extra.com/html/ryobi/ajp-1280/ajp-1280_owners-operating-manual_1507389014.webp)
13
MAINTENANCE
WARNING.
When servicing use only
identical replacement parts. Use of any
other parts may create a hazard or
cause product damage.
WARNING.
Always wear eye protection
with side shields marked to comply with
ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes
resulting in possible serious injury.
WARNING.
Before carrying out any
maintenance, always disconnect the
pressure washer from the mains supply
and, if necessary, allow the machine to
cool down before starting work.
GENERAL MAINTENANCE
Cleaning and maintaining the pressure washer
regularly will give a long and trouble free life.
Before long term storage it is advisable to give the
pressure washer a thorough clean. This should
include the removal of all fitted accessories. Do not
use any solvents as these can damage plastic
parts.
Only clean the casing with a dry cloth and do not
use any cleaning agents, as these may damage
the casing.
WARNING.
Do not at any time let brake
fluids, gasoline, petroleum-based
products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can
damage, weaken or destroy plastIc
which may result in serious personal
injury.
Always allow all water to drain from the pump
before storing
The fan nozzle may get dirty or blocked over time
which will effect operation. Clean the fan nozzle
using the cleaning pin. A garden hose can also be
used to clean the nozzle by back-flushing water
through the nozzle. Combining use of the pin and
back-flushing should enable the nozzle to be fully
cleaned. The frequency of doing this will depend on
the water quality in your area with hard water areas
requiring more frequent cleaning.
Regularly check the water supply inlet connector
filter to make sure it is clear.
STORAGE
Always store this machine in a dry place that will
not fall below 0˚C
RECYCLING AND DISPOSAL
GENERAL MAINTENANCE
Recycle unwanted materials instead of disposing of
them as waste. All tools, hoses and packaging
should be sorted, taken to the local recycling centre
and disposed of in an environmentally safe way.
Recycle rather than dispose of unwanted material
in landfill whenever possible. The machine must be
delivered in rigid packaging to avoid damage
during transportation. The packaging and the
machine itself are manufactured from recyclable
materials and should be disposed of accordingly.
Only dispose of electrical/electronic/battery terms
in separate collection schemes, which cater for the
recovery and recycling of materials contained
within. Your cooperation is vital to ensure the
success of these schemes and for the protection of
the environment.
Recycle packaging where facilities exist.
This symbol is known as the Crossed
out Wheelie Bin Symbol. When this
symbol is marked on a product or
battery, it means that it should not be
disposed of with your general
household waste. Some chemicals
contained within electrical/electronic products or
batteries can be harmful to health.
Summary of Contents for AJP-1280
Page 1: ......