4
OPERATiON
OPERATiNG THE LASER LEvEL
See Figures 9 - 10.
Place the level in the area where you want
the laser line projected.
If a true vertical line or level horizontal line
is desired, level the tool by centering the
bubbles inside the vials located on top of
the laser head.
NOTE: To ensure plumb lines or level hori-
zontal lines across adjacent surfaces, level
both vials and position the tool directly in
front of the work area.
Turn on the laser.
Rotate the laser head to position the laser
line where needed.
With the laser beam pointed away from
you, rotate the laser lens to achieve the
desired angle of beam.
NOTE: Due to construction inaccuracy, walls
may not be perfectly straight. This may cause
the laser to have slight variances when in the
level position.
Fig. 0
Fig. 9
tOp view
ceNtereD
level