5 — English
OPERATION
To install:
Insert the battery pack into the product as shown.
WARNING:
Make sure the latches on the battery pack snap in place
and the battery pack is fully seated and secure in the bat-
tery port before beginning operation. Failure to securely
seat the battery pack could cause the battery pack to fall
out, resulting in serious personal injury.
To remove:
Locate the latches on the side of the battery pack and
depress both sides to release the battery pack from the
tool.
WARNING:
Battery tools are always in operating condition. Therefore,
switch should always be locked with hands free of the
lock-out button when not in use. Remove battery pack
when transporting or carrying the tool to avoid accidental
starting, which may result in serious injury.
For complete charging instructions, see the operator’s manu-
als for your battery pack and charger.
STARTING AND STOPPING
See Figure 5.
To start:
Depress the lock-out trigger.
Depress the switch trigger.
To stop:
Release the switch trigger.
OPERATING THE GRASS SHEAR CADDY
See Figure 6.
Inspect and clear the area of any objects like twigs or
rocks.
Depress the lock out and squeeze the switch trigger to
start the grass shear attatched to the caddy.
If the blade hits a hard object, stop the motor, allow the
blades to stop, and remove the battery pack. Inspect the
blade for damage. Do not use if any damage is detected.
Do not continue use until any damaged item has been
repaired or replaced.
Failure to do so may result in loss of function.
MAINTENANCE
WARNING:
Before inspecting, cleaning, or servicing the machine,
release the switch trigger, wait for all moving parts to
stop, and remove the battery pack. Failure to follow
these instructions can result in serious personal injury or
property damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes, resulting in possible
serious injury.
WARNING:
When servicing, use only recommended or equivalent
replacement parts. Use of any other parts could create
a hazard or cause product damage.
NOTICE:
Periodically inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or a quali-
fied service center for assistance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic, which may result in serious personal
injury.
