![background image](http://html1.mh-extra.com/html/ryobi/875r/875r_operators-manual_1506911010.webp)
OIL AND FUEL INFORMATION
10
RECOMMENDED OIL TYPE
Using the proper type and weight of oil in the
crankcase is extremely important. Check the
oil before each use and change the oil
regularly. Failure to use the correct oil, or
using dirty oil, can cause premature engine wear and
failure.
Use a high-quality SAE 30 weight oil of API (American
Petroleum Institute) service class SF, SG, SH.
ADDING OIL TO CRANKCASE – INITIAL USE
NOTE:
This unit is shipped without being filled with oil.
In order to avoid damage to the unit, put oil in
the crankcase before attempting to start unit.
Your unit is supplied with one 3.4 fluid oz. (100 ml.)
bottle of SAE 30 SF, SG, SH oil (Fig. 4).
NOTE:
Save the bottle to measure the correct amount
for future oil changes. See
Changing the Oil
Pg. 19.
1. Unscrew the top of the bottle of oil and remove the
paper seal covering the opening. Replace top. Cut
the tip off the funnel spout (Fig. 4).
2. Place the unit on a flat level surface.
3. Remove the oil plug / dipstick from the crankcase
(Fig. 5).
Fig. 4
Fig. 6
Oil Fill
NOTE:
Never add oil to the fuel or fuel tank.
5. Wipe up any oil that may have spilled and reinstall
the oil fill plug / dipstick.
The importance of checking and maintaining the proper
oil level in the crankcase cannot be overemphasized.
Check oil before each use and change as needed. See
Changing the Oil
Pg. 19.
Oil Fill Plug/Dipstick
Oil Fill Hole
Fig. 5
4. Pour the entire bottle of oil into the oil fill hole
(Fig. 6).
O-Ring
Funnel Spout
Summary of Contents for 875r
Page 28: ...NOTES 28...