Inspex II User Manual
23 |
P a g e
INSPEX II English Rev 1.06, SW Rev 1.06
Overlay (Graticule):
The Overlay feature can be used to show an overlay of reference edges or dimensions,
giving the operator a Go/No-Go tool for multiple part inspections.
To Create An Overlay:
•
Place the sample under the INSPEX II and set the focal point. Do this by zooming to full
magnification. Manually adjust the height of the INSPEX II until the image is in focus.
(*Reference page 9 for how to set the focal point).
•
Adjust the zoom and illumination settings to the required levels.
•
Take a Snapshot to maintain accuracy and avoid possible influence of vibration.
•
Click on the Measurement icon. Use the tools to add dimensions, shapes and text over
the image. Click on the Save icon and choose
‘Save
As Ash
File’
.
•
To open and use this newly created file, click on the Overlay icon. When opening this
file, the INSPEX II will recall any dimensions, shapes, or text that was saved. It will also
load the zoom position and illumination settings.
•
Samples can now be aligned with the overlay for qualitative analysis.
Using existing Overlay(s):
•
Press the Overlay button and select the required Overlay file.
•
Press open and the Overlay will be displayed at the correct magnification and lighting
settings.
An Overlay contains the System settings specific to that file and will adjust lens diopter, illumination,
magnification and so forth when opened. Note: Current settings will be overwritten when an
Overlay/Measurement file has been opened.
Use the Overlay function to show an overlay of reference edges or dimensions i.e. as a Go/No-Go tool. The
measurement function should be disabled in user level (see
p17-18
) to prevent unauthorized editing of
created Overlays.
