5
V. Installation Guide
Radar Pucks Installation
Installation requirements: sensors should be adhered to the inner corner of the bumper with
supplied Velcro. The angle should be between 20 to 25 degrees with the height ranging from
13
-
35 inches. (Fig.1
-
Fig.2)
OR use provided mounting bracket for vehicle side installation. (Page. 7)
Fig.1 Fig.2
Step1: Measuring method: Measure the rear bumper using the angle gauge to locate the 20 to 30
Degrees angle. (Fig.3
-
Fig.4)
The microwave sensors are only intended for plastic bumpers vehicles.
Please note the BSS2 is NOT applicable metal bumpers.
Fig.3
Fig.4
The angle of the
Microwave radar
sensors is between
20 to 25 Degrees.
