CONFIGURATION AND FUNCTION OF MENU
1. Setting the mode
a. Press Mode button, and the screen will display: Body...°F
b. Press again and the screen will display: Surface Temp...°F
c. Press again and the screen will display: Room...°F
Note: The thermometer default is set to BODY mode
2. Press the °C/°F button to transfer between Celsius and Fahrenheit
3. Press
Mem
(Memory) button, to display the last temperature, and allow for a
viewing of the last 32 measurements taken.
4. Recalibration of device via the F4 MENU
The Sanomedics Non-Contact Professional Thermometer is factory-set. Depending on
various skin types and thickness, there may be temperature differences.
The F4 function will allow unit recalibration. To recalibrate, measure an individual’s
temperature using a conventional thermometer and measure it concurrently using the
Non-Contact Professional Thermometer. If there is a difference between the two
readings, recalibrate the Non-Contact Professional Thermometer.
Instructions for recalibration:
Press the “MODE” and “°C/°F” buttons at the same time for 3 seconds. The screen will
then display: ”F4”
Press “Mode” to increase 0.1°F, press “ °C/°F ” to reduce 0.1°F.
Press “MEM” button to save the setting.
In the cases of seasonal or environmental changes a verification and adjustment
should be carried out.
5. Accessing temperatures stored in memory
To access stored scans (the last 32 scans are available), press “MEM” button, each
time the “MEM” button is pressed the unit will scroll back to the previous measurement.
To exit the Memory function do not press any buttons on the device for 5 seconds.
Important!
In order to get an accurate BODY temperature, it is important that the
thermometer is set to BODY mode.
Utilizing SURFACE or ROOM modes on the thermometer will result in an inaccurate
core body temperature reading on a patient.
Likewise, if taking a surface temperature of an object or liquid, be sure to set the
thermometer to SURFACE Mode. For an accurate room temperature reading, the
thermometer must be set to ROOM mode.
8