GB-7
Jr.
Sodcutter
Figure 4
1. "L" Bracket
10.
Connect clutch control rod to idler pulley
assembly.
1
5386
5169
1
2
3
1
1
5390
1
5391
1
5392
Figure 5
Briggs Engine Shown
1. Brake Band
2. 1/4-20 Screw
3. Clevis
11.
Route convoluted tubing from control panel to
the front of the engine and attach at three
points shown in Figures 6 and 7 (for Honda
engines route wiring and cable on the inside
of the bracket). Secure
Figure 6
1. Tubing Clips
Figure 7
1. Tubing Clip
12.
Connect red wire male connector from
convoluted tubing harness to black female
connector on front of engine. See Figure 8
and 9.
FIGURE Figure 8
1. Black Female Connector
Briggs Engine Shown
SET-UP
