7
Specifications are subject to change without notice.
©2013 Rx Monitoring Services, Inc.
Hang the Temp/Hum probe at a minimum
a.
height of 6 feet (if possible), and make sure
it is not positioned near a door, window, or
ventilation unit.
Plug into the Port 1 under AUX on the front
b.
of the Power Monitor.
5. Connect the Temperature & Humidity Probe (If Supplied)
Plug power cord into grounded receptacle
a.
Plug the supplied IEC cord into the external DC
b.
power supply.
Plug the male external DC power supply plug into
c.
the Power Monitor.
b. Connect IEC
c. Plug In Barrel
DC Power Supply
6. Power up the Cx Monitor
7. Power up load circuit and system
Caution - Always use a grounded receptacle
