Rx Monitoring Services EPA1500, Installation Manual

Page: 2 / 10

2
Specifications are subject to change without notice. ©2013 Rx Monitoring Services, Inc.
WARNING
:
Before using the power monitor inspect wireless probes, voltage probes, current probes, leads and accessories for •
mechanical damage or broken plastic and call Rx Monitoring Services Inc. for replacements.
Wear proper Personal Protective Equipment, including safety glasses and insulated gloves when making connections
•
to power circuits.
Use only current probes, test leads, and adapters supplied with the power monitor and wireless probes.
•
Remove unnecessary voltage leads or accessories that are not in use. •
Make sure the power monitor is properly connected through the power cord to protective earth ground. •
Do not insert foreign objects into connectors, only use approved accessories. •
Never open the power monitor, there are no customer replaceable parts. •
Never use power monitor outside or when condensing water is present. •
Use supplied safety kit and properly lockout circuits under test. •
Hands, boots and the working area must be dry when making connections to power system. •
Do not operate the Power Monitor or probes around volatile gas or vapor. •
***** WARNING DO NOT EXCEED SAFETY RATINGS *****
Power Monitor : CAT III - 600V Pollution Degree 2
Rope CT’s : CAT III - 1000V Pollution Degree 2
Clamp CT’s : CAT III - 600V Pollution Degree 2
Wireless DC : CAT II - 600V Pollution Degree 2
Wireless DCx : CAT II - 150V Pollution Degree 2
Definitions:
WARNING •
This statement is to reinforce the practice of certain conditions may cause physical bodily harm or loss of life.
CAUTION •
This statement is to reinforce the practice of certain conditions may cause physical damage to the Cx Monitor, accessories, equipment
or property.
Symbols:
The following are (IEC) symbols are used on this document or on the power monitor, and their definitions.
This symbol indicates that caution is necessary when operating the device or control
close to where the symbol is placed, or to indicate that the current situation needs
operator awareness or operator action in order to avoid undesirable consequences.
This symbol indicates high voltage. It calls your attention to items or
operations that could be dangerous to you and other persons operating this
equipment.
Read the message and follow the instructions carefully.
This symbol indicates AC or DC voltage or current
This symbol indicates safety ground conductor.