RWD R640-S1, User Manual, Page: 11 / 33

7
system or replace internal parts.

Keep open flames and combustibles (e.g., ether and acetone) away from the anesthesia
system.

Do not place any heavy things on the anesthesia system.

Make sure that the oxygen hose does not cross walkways and aisles. This may present a
tripping hazard.

Wearing personal protective equipments is suggested.

Make sure the oxygen hose is securely connected to the system before starting a
procedure.

Make sure that any exhaled gas containing anesthetic is recovered or vented outside of
the operating room. A waste gas evacuation system must be used.

RWD recommends the use of an electrocardiograph, and equipment capable of
monitoring the animal’s pulse, oxygen (O
2
) saturation, carbon dioxide (CO
2
) level, and
anesthetic agent level at all times when operating the system.

Remove the system from service if any indications of improper function exist.

Never pour water or any other fluids into the anesthetic vaporizer. Fill vaporizer only
with the anesthetic agent for which it is designed.

Avoid use of oil or grease on any anesthesia or respiratory equipment where oxygen is
used. An explosion may occur.
2.4.2 Preventing system and facility damage

Immediately contain and clean up spilled anesthetic.

Isoflurane is very caustic and may dull the paint finish of the system if spillage occurs.
If spillage should occur, allow it to evaporate. Do not attempt to wipe it with a cloth.

Do not place heavy on top of the anesthesia equipment.

Follow all recommended system maintenance procedures specified in Section 7 –
Maintenance.

Keep appropriate distance from the wall to ensure a stable gas supply.
2.4.3 Facility environment health

Immediately contain and clean up any spilled anesthetic agent.

If the system is used in a confined space, ensure that there is adequate ventilation.

Dispose of any hazardous materials and items contaminated with hazardous materials
should be in accordance with local regulations.
2.5 System malfunction
If your system does not operate properly, refer to Section 6 – Troubleshooting which includes
Problem descriptions, possible causes, and suggested solutions.