40
/
44
Manuale Utente
Rev. 1.1 - 21/06/14
/TLW-TEX2HE & /TLW-TEX3HE
ELETTRONICA
4.2 Settings of the Measures (Write)
Similarly to readings and settings of the measurements, the commands have a
set of OID that are only in writing mode.
Tipically the value of command are read as “1”; the user must send a “2” as value
to send a command. No other values are accepted as a command.
Usually the commands are one-shot toggle. In other words, if the transmitter is turn
“ON” (value “2” on set-transmitter-on), the next command is a turn “OFF” (value
“2” on set-transmitter-off).
In the following example, the command of Set-Transmitter-On is indicated as
READWRITE:
Figure 3
Into the MIB are specified the range and description of each variable, in this case is
shown the description of command brought in information box of your browser.
