/TLM-TEX & RDMODGSM-TEX
12 / 18
User Manual
Rev. 1.2 - 18/04/08
PHONE NUMBER: GSM phone numbers recognised by the station to which
you want the alarms sent;
SMS: select “YES” to enable transmission of SMS commands to system;
ACS: select “YES” to enable SMS reception.
Note:
For correct transmission, place country code (+XX) before set numbers
(Use +39 for Italy).
When all parameters are set, press this key and the internal or external Telemetry
option will store the information.
When finished, click “Exit” to exit the remote station programming window.
Back into “TELECON” standard interface, click the “General” measurement
selection button to set thresholds and operation times for the various alarms
according to the principles outlined in Section “Alarm Management”.
Note:
When setting alarm thresholds, allow a margin of some percent points with
respect to normal operation parameters.
•
•
•
