Suction Line Run—Feet [m]
Optional
Standard
Optional
Optional
Standard
Optional
Optional
Standard
Optional
Optional
Standard
Optional
5
/
8
" [15.88 mm] O.D. Optional
*
3
/
4
" [19.05 mm] O.D. Standard*
—
3
/
4
" [19.05 mm] O.D. Optional
*
7
/
8
" [22.23 mm] O.D. Standard*
—
25' [7.62]
—
1.00
1.00
.99
1.00
—
1.00
1.00
—
0
.99
1.00
—
50' [15.24]
—
.99
1.00
.98
.99
—
.98
.99
—
.98
.99
—
100' [30.48]
—
.97
.98
.95
.97
—
.95
.97
—
.94
.97
—
150' [45.72]
—
.95
.97
.91
.95
—
.93
.95
—
.91
.95
—
—
5
/
8
" [15.88 mm] O.D. Standard*
3
/
4
" [19.05 mm] O.D. Optional
*
Suction Line Length/Size vs. Capacity Multiplier (2-Stage R-410A)
3
/
4
" [19.05 mm] O.D. Optional
*
7
/
8
" [22.23 mm] O.D. Standard*
—
7/8" I.D.
7/8" I.D.
3/4" I.D.
3/4" I.D.
Suction Line Connection Size
5 Ton
4 Ton
3 Ton
2 Ton
Unit Size
2-Stage
R-410A
System
Capacity
Model
Liquid Line
Connection Size
(Inch O.D.)
[mm]
Liquid Line Size
Outdoor Unit Above or Below Indoor Coil
Total Equivalent Length—Feet [m]
25 [7.62]
50 [15.24]
75 [22.86]
100 [30.48]
125 [38.10]
150 [45.72]
5/16 [7.94]
25 [7.62]
50 [15.24]
40 [12.19]
35 [10.67]
29 [8.84]
22 [6.71]
2 Ton
1/4* [6.35]
25 [7.62]
10 [3.05]
N/A
N/A
N/A
N/A
3 Ton
5/16* [7.94]
25 [7.62]
39 [11.89]
28 [8.53]
16 [4.88]
5 [1.52]
N/A
3/8 [9.53]
25 [7.62]
50 [15.24]
51 [15.54]
48 [14.63]
44 [13.41]
40 [12.19]
3/8
*
[9.53]
25 [7.62]
47 [14.33]
40 [12.19]
32 [9.75]
24 [7.32]
17 [5.18]
1/2 [12.7]
25 [7.62]
50 [15.24]
56 [17.07]
54 [16.46]
52 [15.85]
50 [15.24]
5 Ton
3/8* [9.53]
25 [7.62]
41 [12.50]
30 [9.14]
20 [6.10]
10 [3.05]
0 [0.00]
4 Ton
5/16* [7.94]
25 [7.62]
15 [4.57]
N/A
N/A
N/A
N/A
Maximum Vertical Separation—Feet [m]
3/8 [9.53]
25 [7.62]
50 [15.24]
45 [13.72]
42 [12.80]
39 [11.89]
37 [11.28]
Liquid Line
Connection Size
(Inch I.D.)
5/16
″
5/16
″
3/8
″
3/8
″
NOTES: Using suction line larger than shown in chart will result in poor oil return and is not recommended.
*Standard line size.
[
] Designates Metric Conversions
Heat Pump Refrigerant Line Size Information
NOTES: N/A – Application not recommended.
*Standard line size.
GENERAL TERMS OF LIMITED WARRANTY
Ruud will furnish a replacement for any part of this product
which fails in normal use and service within the applicable
period stated, in accordance with the terms of the limited
warranty.
For Complete Details of the Limited Warranty, Including Applicable Terms
and Conditions, See Your Local Installer or Contact the Manufacturer for
a Copy.
Limited Parts Warranty:
Ruud
Ultra Series™
equipment features a 10-year limited
parts warranty.*
*This ten-year limited parts warranty is applicable only to single-phase
products installed in residential applications.
UPRL- JEZ Conditional Replacement Warranty:
Ruud will provide a replacement UPRL-JEZ Heat Pump to
the original purchaser if the compressor fails within 10 years
(providing the unit is installed with a new Ruud
Ultra
Series™
Air Handler OR Ruud Indoor Coil with a Ruud
Ultra
Series™
Gas Furnace, and is properly matched according to
Ruud specifications), and if additional conditions are satis-
fied. See product warranty card for additional information.
Before proceeding with installation, refer
to installation instructions packaged
with each model, as well as complying
with all Federal, State, Provincial, and
Local codes, regulations, and practices.
Ruud Heating,
Cooling and
Water Heating
P.O. Box 17010, Fort Smith, AR 72917
“In keeping with its policy of continuous progress and product improvement, Ruud reserves the right to make changes without notice.”
PRINTED IN U.S.A.
4-08 DC
FORM NO. P22-770 REV. 4
S u p e r s e d e s F o r m N o . P 2 2 - 7 7 0 R e v. 3
