background image

                  

The symbol of a crossed out dustbin means that the product cannot be
disposed of with household waste. It is the user’s responsibility to take
the used equipment to a waste disposal site which has the facilities to
handle electrical and electronic equipment. By ensuring this equipment
is handled correctly you help to protect the environment. For more
information about how to recycle this product please contact your local
authority, waste removal provider or the shop where this product was
purchased.

RUTUS

 Alter71 

ver. 2.0

                                                                                                     

 26 

RUTUS 

Arkadiusz Rutyna

ul. Krakowska 32

84-230 Rumia

Poland

tel. + 48 58 679 33 14 

+ 48 601 284 371

[email protected]

www.rutus.com.pl

EU DECLARATION OF CONFORMITY

Manufacturer: RUTUS Arkadiusz Rutyna, ul. Krakowska 32, 84-230 Rumia, Poland

Product: Metal detector Alter71

The manufacturer hereby states that this product is in accordance with the requirement 
of Directive 2014/30/UE on the harmonization of the laws of the Member States relating 
to electromagnetic compatibility with all later amendments and supplements as it meets 
the requirement of the following harmonised norms:

PN-EN 61000-4-2:2011
PN-EN 61000-4-3:2007 + A1:2008+A2:2001
PN-EN 61000-4-8:2010
PN-EN 6100-6-3:2008 + A1:2012

Test report no. 086/LMC/2016 from 16.08.2016.

This test was conducted at Laboratorium Badawcze Oddziału Instytutu
Elektrotechniki (Institute of Electronics Research Laboratory) in Gdansk, which 
is accredited by PCA in the area of tested product and owns an accreditation certificate 
no. AB007.

This declaration conformity is issued under the sole responsibility of the manufacturer.

Summary of Contents for Alter71




























Reviews: