Rutenbeck Control IP 4, Operating Instructions Manual, Page: 6 / 20

6 Settings
1. Connect the Control IP 4 to
the local network using a
patch cable (available
separately).
2. If necessary, connect the
temperature sensor to the
two terminals.
3. Connect the Control IP 4 to
the 230 V mains voltage.
4. The Control IP 4 can
now be accessed via the
address http://192.168.0.3
or http://TCRIP4 (factory
setting).
5. Select the “Network” menu
in the menu bar (Fig. 1, A).
6. Select an individual “Net-
work name” in order to be
able to call up the Control
IP 4 directly.
7. Modify the IP-address of
the Control IP 4 to suit your
own needs.
8. The configuration is stored
by pressing “Save”.
Network settings without DHCP server
Settings