12 Switching
The outputs can also be
switched to impulse mode
via the “Send impulse” menu
(Fig. 3, J). There are two differ-
ent types of impulse. The “On”
impulse switches the output on
for a selected period of time,
the “Off” impulse switches the
output off.
The impulse period commences
when the “Send” field is clicked.
The time at which the ‘Impulse
activated’ notification is con-
firmed with ‘OK’ has no effect
on the impulse period.
The output is switched off once
the period has elapsed.
The Control IP 4 acts converse-
ly when an out impulse is sent
when the output is switched off.
The current state of the respec-
tive output is displayed.
Impuls mode
Switching
Summary of Contents for Control IP 4
