REMOVING THE CHAIN DRUM
REMOVING THE PULLEY
Information guide on how remove the Pulley.
Genuine Rustibus® parts only!
Machine may vary from pictures
Take off the pulley: loosen the ‘umbrako-bolts’
(
*
fig.2)
in the Bush. (See picture below) Place one of these
bolts in the ‘Third hole’
(
*
fig.1)
and tighten up the bolt until the Pulley is loose. Pull off the pulley by hand
or use light tools.
Do not use an Adjustable Bearing Puller to do this!
NOTES ON BELT REMOVAL.
TAKING OFF AND REINSTALLING THE BELTS CAN BE DONE BY TURNING THE CHAIN DRUM AND USING
A SCREWDRIVER TO LEVER OFF THE BELTS.
*
fig.2
*
fig.2
*
fig.1
