REPLACING THE CHAIN DRUM
REPLACING THE DISPOSABLE CHAIN DRUM
Information guide on how to replace the Chain Drum.
Genuine Rustibus® parts only!
Machine may vary from pictures
1.Replacing the Chain Drum on
Rustibus® 2000 Series is the same
for all types : low, standard, electric,
pneumatic and our Atex/Ex Certified
machines.
3. Make sure that the square
bearing is on the inside and the
round bearing is on the outside.
2. Make sure that the grease nipple (
*
fig.1) is poiting down when you are
putting the chain drum inside the chassis.
4. Put on the bolts but don´t fasten
them more then necessary.
5. Go on the other side of the chassis
and make sure the round bearing is
on the correct spot
.
*
fig.1
*
fig.1
