11
XZone4 Installation Manual
CONFIGURATION STREAMING SERVICE ACCOUNTS (OPTIONAL)
Note: Configuring accounts must be done for each of the four rooms. Different
accounts may be entered for each zone if desired.
Spotify® – Spotify account credentials are entered in the Spotify app on your
phone, tablet, or PC. No additional information needs to be entered on the
XZone4. Note that the name that you configured under “Device Name” will
be the same name that appears in the Spotify Connect menu as an available
selection, for example “Kitchen”, “Bedroom”, “Patio”, etc. This same name is also
the name used when connecting to the zone via Apple AirPlay.
Pandora®– Pandora account credentials are entered by using the MyRussound
App or a connected Russound XTS in-wall touchscreen. Select the desired
zone as the active audio source and then choose “Pandora” from its menu. If
no account information has been entered, a login screen will be displayed.
SiriusXM® – SiriusXM account credentials are entered by using the
MyRussound App or a connected Russound XTS in-wall touchscreen. Select
the desired zone as the active audio source and then choose “SiriusXM” from
its menu. If no account information has been entered, a login screen will be
displayed.
vTuner® – No account information is needed to access vTuner internet radio.
If you wish to associate a zone’s Streamer with a vTuner account so that you
can share vTuner favorites across multiple devices, you can select “Get Access
Code” from the zone’s vTuner menu and enter that code at http://russound.
vtuner.com to associate that zone’s Streamer with your vTuner account.
TuneIn® – No account information is needed to access Tunein internet radio.
If you wish to associate a zone’s Streamer with a TuneIn account so that you
can share TuneIn favorites across multiple devices, you can select “Account
Association” from the zone’s TuneIn menu and enter that code in your account
settings page at http://www.tunein.com to associate that zone’s Streamer with
your TuneIn account.
Multiple Streaming Products
Note that account settings are individual settings for each zone of the XZone4
or other Russound XStream Series streaming product. If you have multiple
XStream Series devices, each must be configured with the appropriate
account logon information. This is done so that each device can have its own
independent user in a home so that users will not have to share accounts or
favorites with anyone else in the home.
DHCP Reset
A DHCP Reset can be performed using the factory reset button on the rear
panel of the XZone4.
If your XZone4 cannot communicate on the network, you can reset its DHCP
connection by pressing and holding the Reset button on the rear of the
XZone4 for 3 seconds and then releasing it. This will restore the XZone4 to a
DHCP connection from a static IP connection.
Factory Reset
For a full factory reset, erasing all configuration settings, and re-locking the
XZone4:
Press and hold the Reset button on the rear of the XZone4 for 10 seconds.
The Red Status LED will light and the XZone4 will reboot on its own.
Note: Performing a factory reset will restore the unit to its factory default
settings and the unit will require valid Russound Certified Installer credentials
in order to be unlocked and configured again. The factory reset will also delete
all personal information including service account settings and passwords.
There are four LED’s on the front panel of the XZone4 to assist with any troubleshooting.
This chart explains the operation of the LED’s:
TROUBLESHOOTING
System Status
Yellow
LED
Green
LED
Red
LED
Blue
LED
Booting
ON
-
-
-
Ready
-
ON
-
-
Factory Reset
-
-
ON
-
Zone On
-
-
-
ON
Firmware Update
-
Blinking
-
-
Network Error
Blinking
-
-
-
XZone_Manual.indd 11
3/3/16 11:31 AM
