5
Russound XSource Installation Guide
Ethernet Connection
The Ethernet connection is used for configuration and
programming as well as for enabling control via the
MyRussound App or the XTS Touchscreen. The default
network setting is DHCP-enabled, but the XSource can be
configured with a static IP address using the Web Config
software. The Ethernet connection is also used for the built-
in streaming services and for playing any music stored on
connected network drives using DLNA.
Factory Reset
The factory reset button has two functions. A 3-second press
and hold will restore network settings to DHCP. A 10-second
press and hold will reset the XSource to its factory default
settings.
Note: Performing a factory reset will restore the unit to its
factory default settings and put XSource in Zone mode.
The unit will require valid Russound Certified Installer
credentials in order to be unlocked and configured again.
The factory reset will also delete all personal information
including service account settings and passwords.
ETHERNET CONNECTION AND FACTORY RESET
Ethernet port
Factory Reset
