When another UNO Systems Keypad selects the same source, a DND icon will appear alerting the user the source is in Do Not Disturb mode.
8. PARTY MODE - Master (Enable/Disable) When in "PARTY MODE" the system is primarily controlled by a "MASTER" Keypad. Party Mode links all
rooms to the same source which is selected by the Master Keypad room. Any keypad in the system can become a Master Keypad (if enabled) but only one
Master Keypad may exist at a time in Party Mode. Selecting Master Keypad mode from another keypad will transfer Master Keypad control to that room and
release it from the first. When the source selected in the Master Keypad room is changed then the source for all rooms changes as well. Volume level changes
at the Master Keypad will be reflected in all rooms in Party Mode. Non-Master zones in Party Mode can temporarily override Master Keypad volume level
adjustments for their particular room preference. F1 and F2 favorite presets selected from the Master Keypad will be enabled in all rooms in Party Mode.
Master Keypad will not change Bass, Treble, or Loudness adjustments for any other rooms other than the Master Keypad room.
Every other keypad will still operate its respective bass, treble, balance and loudness adjustments for that room. 9. FRONT (AUX) A/V IN - Enabled/Disabled
Allows the system to select a seventh source option through the controller's front panel AUX connection for use with camcorders, game consoles, etc. 9
INSTALLER GUIDE UNO-S2 Keypad Update Port 1 DATA RS-232 DATA RS-232 GND N/C +12VDC 2 1 2 SETUP BUTTON - Activates Installer Setup
Mode for the UNO-S2 keypad OS UPDATE PORT - Port used for UNO keypad OS software updates 10 INSTALLER GUIDE UNO-S2 Keypad Rear Panel 2 3
1 4 1 2 3 4 EXTERNAL IR RECEIVER IN CONNECTOR - Connection for external IR Receiver OS UPDATE JUMPER - Selects "Run" or "OS Update" mode
RESET BUTTON - Reset whenever changing from RUN to OS update 110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between the
UNO-S2 Keypad and the CAV6.6/CAM6.
6 controller 11 INSTALLER GUIDE UNO-S2 Keypad Connections Punchdown Tool Jumper Setting (back of keypad) Punchdown Tool CAT-5 Connections
(back of keypad) OS Update Port (front of keypad) 12 INSTALLER GUIDE UNO-S2 Keypad Connections CAT-5 Connection The UNO-S2 Keypad uses a
110-punchdown terminal to provide a simple installation and strong connection for CAT-5 cable's eight conductors. Punchdown terminals require the use of a
punchdown tool which has been provided with the keypad kit. Attach the CAT-5 cable to the 110-punchdown terminal on the UNO-S2 Keypad as shown,
matching the conductor colors to the connection color guide. The keypad will not operate properly if the terminations deviate from the required connection
order. Caution Take care when using an impact 110 punchdown tool, as this may overspread the contact points.
Use of the impact tool may propel stray bits of wire and jacket into the keypad's chassis and possibly cause a short in the circuitry. Gently shake or blow air
through the keypad chassis to remove stray wire before the keypad is installed into the junction box. OS Update Port The OS Update Port is is used to update
the UNO-S2 Keypad operating system software in the future. When an update is released, it will be available online through the Document Center at
www.russound.com. Look for the Technical Documents under Multisource/Multi-room products. The Programming Cable is available from Russound, Part
#2500-121036. Jumper Setting The jumper settings on the back of the UNO-S2 Keypad can be set for "Run" and "OS Update." The jumper setting must be in
the "Run" position before the keypad is mounted into the junction box, and must remain set in "Run" to operate the keypad.
The jumper will be set to "OS Update" only while updating the keypad's operating systems. 13 INSTALLER GUIDE UNO-S2 Keypad Diagnostics Menu The
Diagnostics Menu allows the installer to run a diagnostic check on the keypad and to verify the firmware version.
You're reading an excerpt. Click here to read official RUSSOUND
UNO-S2 user guide
http://somemanuals.com/dref/77396
