Russound PR-4Z, Instruction Manual, Page: 9 / 33

8
PR-4Z CONTROL FEATURES
Figure 9 – Zone Control Functions
1) Master Power Switch – Controls power to entire PR-4Z system (including switched outlets). The “0” indicator signifies
power off, the symbol “I” signifies power on.
2) Infra-Red Receiver – Provides IR control for zone #1. The IR receiver located on the front of the PR-4Z will provide con-
trol for the #1 zone of the PR-4Z and will not pass common IR codes.
3) Zone Select Buttons – Selects zone (1-4) to be displayed and/or accessed on PR-4Z front panel.
4) Zone Select Indicators – Indicates which zone (1-4) is currently displayed on the PR-4Z front panel (“current zone”).
5) All On / All Off – Turns all zones on and off respectively. The All On command may be “preset” such that a zone/zones
may be selectively omitted from the All On function (see memory procedure). The All Off function, in addition to turning
off all zones, can be used to control the power to additional equipment, such as a 4-Zone Amplifier, CD player, etc.
through the use of the seven switched AC outlets located on the rear of the PR-4Z. When all zones in a PR-4Z system are
turned off through use of the All Off feature or independently, the PR-4Z will turn off the switched AC outlets after wait-
ing five minutes. If it is desired that the AC switched outlets be turned off immediately, press the All Off button twice.
6) Current Zone On / Off – On / Off control for zone currently displayed.
7) Zone On / Off Indicators – Shows On / Off status of zone currently displayed.
C
ONTROL
F
EATURES
T
UNER
1 2
O
N
/O
FF
Z
ONE
S
ELECT
P OWER
A LL
O
N
A
LL
O
FF
B
ASS
T
REBLE
L
OUDNESS
P
ARTY
SOURCE LINK
SOURCE LOCK
M
EMORY
V
OLUME
P
RESET
3 4
CD T
APE
V
IDEO
1 V
IDEO
2 DVD
4 Z O N E — 6 S O U R C E A U D I O / V I D E O P R E A M P L I F I E R
PR-4Z
1 2
3 4
1 - Master Power Switch
2 - Infra-Red Receiver
3 - Zone Select Buttons
4 - Zone Select Indicators
5 - All On / All Off
6 - Current Zone On / Off
7 - Zone On / Off Indicators