Russound PR-4Z, Instruction Manual, Page: 13 / 33

12
P
ERIPHERAL
D
EVICES
INFRARED DEVICE WIRING INSTRUCTIONS
Figure 15 – Infra-Red Receiver Wiring Configuration
Wire Infra-Red receivers as shown in Figure 15 using 22-24
AWG 1 pair twisted wire with shield. Wiring configuration
also applies to other manufacturers’ programmable keypads.
PCK-IR CONTROL FEATURES
Figure 16 – PCK-IR Zone Control Functions
1) On / Off Button – Turns zone on / off.
2) Preset Button – Accesses stored preset information (see
memory / preset procedure).
3) Infrared Receiver – Provides IR control of zone and
source equipment through the keypad.
4) System Off Button – Turns all zones off.
5) System On Button – Turns all zones on.
Figure 17 – PCK-IR Audio Control Functions
1) Bass / Volume / Treble Select Indicators – Indicates
which function is selected to be adjusted.
2) Select Button – Selects which function (volume, bass,
treble) is to be adjusted by the up / down control buttons.
3) Up / Down Control Buttons – Provides up / down control
for volume, bass, and treble.
4) Source Select Buttons – Selects and indicates source
input.
5) Loudness Button – Selects and indicates loudness on /
off for zone.
TREBLE VOLUME BASS
PR-4Z SYSTEM CONTROLLER
SELECT
CD TAPE TUNER
VID2 DVD VID1
ZONE
ON/OFF
PRESET LOUD
SYSTEM
OFF
SYSTEM
ON
1 - On / Off Button
2 - Preset Button
3 - Infrared Receiver
4 - System Off Button
5 - System On Button
TREBLE VOLUME BASS
PR-4Z SYSTEM CONTROLLER
SELECT
CD TAPE TUNER
VID2 DVD VID1
ZONE
ON/OFF
PRESET LOUD
SYSTEM
OFF
SYSTEM
ON
1 - Bass / Treble / Volume
Select Indicators
3 - Up / Down Control
Buttons
2 - Select Button
4 - Source Select Buttons
5 - Loudness Button
KEYPAD 1 KEYPAD 2 KEYPAD 3 KEYPAD 4
D2 D1 G V+ D2 D1 G V+ D2 D1 G V+ D2 D1 G V+
1 PAIR TWISTED WIRE
WITH SHEILD
GND
OUT
N / C
+12V
MODEL #848 J-BO
X
RECIEVER