Russound PR-4Z, Instruction Manual, Page: 6 / 33

5
W
IRING
I
NSTRUCTIONS
PR-4Z WIRING INSTRUCTIONS
Make line level and composite video connections from
source equipment to PR-4Z as shown in Figure 3. Use high
quality audio and audio/video cables and make cable length
as short as possible to keep signal integrity intact. The PR-4Z
provides switched two-pole 115 VAC outlets designed to
supply power to low current devices such as CD players, tape
decks and/or VCRs etc.. All switched AC outlets are active
when any zone within a PR-4Z system is “ON”. When all
zones are turned off, the PR-4Z will wait five minutes and
then turn off the AC outlets. All six of the two pole AC out-
lets can supply a combined current output of 1 Amp max.
If using a Four Zone Audio Amplifier, make audio connec-
tions from the PR-4Z to the amplifier as shown in Figure 5.
Use good quality audio cables and keep cable length as short
as possible to keep signal integrity intact. A single high cur-
rent 115 VAC, three prong switched outlet is provided to
allow power connection to the amplifier. The high current
AC outlet can supply a maximum current output of 8 Amps.
If using multiple stereo amplifiers, make audio connections
as shown in Figure 6.
WARNING : DO NOT MAKE A CONNECTION TO THE
HIGH CURRENT SWITCHED AC OUTLET THAT
REQUIRES MORE THAN 8 AMPS MAX.
Figure 3 – Source Component Connections
AC 115V~
60HZ XA
L
R
LEFT
VIDEO
RIGHT
INPUTS
CD 4 3 2 1 AUX VID2 VID1 TAPE TUNER
INPUTS OUTPUT TO ZONES
WARNING: SHOCK HAZARD – DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE – NEZ PAS OUVRIR
SWITCHED
AC OUTLETS
115V~ 60HZ
1A MAX TOTAL
FUSE
10 AMP IR
OUT
CMN 1 2 3 4
KEYPAD 1 KEYPAD 2 KEYPAD 3 KEYPAD 4 PAGE 1 PAGE 2 PAGE 3 PAGE 4
D2 D1 G V+ D2 D1 G V+ D2 D1 G V+ D2 D1 G V+
V G S T V G S T V G S T V G S T
SWITCHED
OUTLET
UNIT INTERFACE
8A MAX
RUSSOUND
NEWMARKET, NH
MADE IN USA
A A
B B
VCR 2
VCR 1
LASER DISC PLAYER
TAPE DECK
CD PLAYER
TUNER
115 VAC~
115 VAC~
115 VAC~
115 VAC~
115 VAC~
115 VAC~
TO UN-SWITCHED
115 VAC
WALL OUTLET