background image

Safety Instructions

1.

Read these instructions.

2.

Keep these instructions

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or
grounding plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provid-
ed plug does not fit into your outlet, consult an electri-
cian for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where it exits from the apparatus.

11.

Use only attachments or accessories specified by the
manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer or sold with the appara-
tus. When a cart is used, use caution when moving the
cart-apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when

unused for long periods of time.

14.Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been dam-
aged in any way, such as the power supply cord or plug
is damaged, liquid has been spilled or objects have fall-
en into the apparatus, or the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.

If you have any questions, call Russound at
1.800.638.8055 or 603.659.5170.

Summary of Contents for Decora ComPoint








Reviews: