Russell Hobbs RHSWD3 Instructions And Warranty Download Page 3

 

11. Before using your water dispenser, rinse out any dust (Due to transportation).This can be 

done by running water through the dispenser taps. Empty at least one dispenser water bottle. 

Then empty the tanks completely by opening the water discharge stopper at the back of the 

water dispenser.   

12. To prevent damaging the heating system, never operate the heating function before water 

comes out of the hot water tap. 

13. While using the product, do not put a new dispenser water bottle before water in the current 

dispenser water bottle is completely finished. This maintains the water level inside the water 

dispenser. 

14. In case of technical problems, switch off the machine and do not attempt to repair it yourself. 

Return the appliance to an authorized service facility for examination, adjustment or repair. 

Always insist on the use of original spare parts. Failure to comply with the above mentioned 

pre-cautions and instructions, could affect the safe operation of this machine. 

15. Remove the plug from the socket by gripping the plug. Do not pull on the cord to disconnect 

the water dispenser from the mains. Always unplug the water dispenser when it is not in use, 

before cleaning, during maintenance or when removing/adding parts.   

16. Only use dispenser water bottles that have been designed for this water dispenser. The use of 

accessory attachments that are not recommended or supplied by the manufacturer may result 

in injury, fire/electric shock or may damage the water dispenser. 

17. Tear the hygienic label off the pre-filtered water bottle. Alternatively assemble the Russell 

Hobbs Purification and Mineralization bottle (RHPM1) suited especially for this unit. 

18. Place the bottle reversely into the water protector on the top part of the water dispenser. 

19. Keep away from other electronic appliance, e.g. TV, CD player or Stereo system. 

20. Store the water dispenser in a cool, shadowed area . 

21. Do not use the water dispenser as a supportive structure. 

22. Do not use the water dispenser if it has been dropped or damaged in any way.   

23. Do not puncture or damage the gas channels at the back of the water dispenser. If cooling gas 

comes into contact with skin or eyes it may cause irritation or injury. Please contact a health 

practitioner.  

24. Do not cover the water dispenser or place objects where they can block the top of the water 

dispenser. 

25. Children should be supervised to ensure that they do not play with the water dispenser.  

26. This product has been produced only for water heating and cooling purpose. Do not use it for 

cooling buttermilk drink, lemonade or drinks with high percentage of alcohol.  

27. Never keep products containing flammable gas (e.g. spray) and explosive materials near your 

appliance.  

28. Do not tilt your appliance more than 45° during transportation or relocation.  

29. Do not use damaged dispenser water bottles  

30. To prevent damage to the heating system, never operate the heating function before water 

comes out of the hot water tap. 

Summary of Contents for RHSWD3










Reviews: